Mx-Pnx5A/B/C/D - Sharp MX-M283N Installation Manual

[8] MX-PNX5A/B/C/D

MX-M503N
1. Unpacking
A. Removal of the punch unit
B. Check the packed items
1) Check that all the items are included in the package.
1
000-0000
3
No. Packed part names
1 Harness A (Purple)
2 Harness B (Gray)
3 Punch jam processing label
* Use the punch position labels bundled with the MX-FN10.
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1) Turn OFF the power switch on the operation panel.
2) Open the front cabinet.
Turn OFF the power switch in the front cabinet of the main unit.
Service Manual 3) Disconnect the power plug of the main unit from the power out-
let.
4) Disconnect the connector between the main unit and the sad-
dle finisher.
2
Quantity
1
1
1
B. Installation of the punch unit
1) Release the lock and separate the saddle finisher from the
main unit.
OFF
MX-M503N MX-PNX5A/B/C/D 8 – 1