Sharp MX-M283N Installation Manual page 32

13) Install the front open/close cover (package part No. 4) to the
front rail stay rotating shaft, and fix it with the resin clip (pack-
age part No. 9).
1
14) Fix the punch cover (package part No. 5) together with the
band (metal fixture) with the fixing screw (package part No. 8).
2
15) Install the front cabinet upper with two screws.
2
1
MX-M503N MX-FNX9 4 – 4
D. Connector Installation
1) Remove the protection material and fixing tape.
1
2) Remove the screw, and remove the connector cover.
3) Connect the finisher connector with the main unit connector,
and tighten with a screw.
2