Sharp MX-M283N Installation Manual page 22

7) Insert the temporarily fixed screw B into the key hole in the
connection unit (package part No. 2), and temporarily fix the
connection unit.
2
8) Fix the other fixing screw B (package part No. 4), and tighten
the temporarily fixed screw B securely.
1
9) While lifting the section marked with
unit into the large capacity tray unit, and fix the fixing screw C
(package part No. 5) at the mark A on the connection unit.
C. Height adjustment of the large capacity tray
unit
1) Put the large capacity tray unit closer to the main unit.
1
2
, insert the connection
1
2
MX-M503N MX-LCX1 3 – 3
2) Check to insure that the height adjustment check rib of the
large capacity tray unit and the axis line of the mounting plate
upper mounted to the main unit are in the same line.
[Shift to the left]
3) If the height adjustment is not required, insert the large capac-
ity tray unit further more.
If the height adjustment is required, perform the adjustment
procedures from 4).
4) Loosen the adjustment screw on the F side.
* Use the adjustment screw on the front side for the adjust-
ment. Do not touch the screw on the rear side.
NOTE:
If the screw is loosened or removed when servicing, be sure
to execute "C. Height adjustment of the large capacity tray
unit" after completion of servicing.
[Shift to the right]