Sharp MX-M283N Installation Manual page 100

[26] MX-AMX3
MX-M503N
* This option requires installation of a HDD, and cannot be
used with the models having no HDD.
When this option is used with the U model, the MX-PB11
option must be installed.
1. Unpacking
A. Check the packed items
1
No. Packed part names
1 CD-ROM
2 Operation manual
2. Installation
<Note before installation>
* To enable the external account kit, the product key must be
acquired.
A. Make preparations for enabling the external
account kit.
(1) To enable the external account kit, enter the
product key by key operations on the operation
panel.
1) Press [SYSTEM SETTINGS] key.
2) Touch [Administrator Password] key.
3) Touch [Password] key and enter the administrator password.
4) Touch [OK] key.
5) Scroll the screen, and touch [Product Key] key.
6) Touch the input column.
7) Enter the product key with 10-key, and touch [OK] key.
• The product key can be entered from the Web page. For details,
refer to [HELP] on the right upper side of the Web page.
(2) Make the OSA setting.
1) By the procedure of (1), "OSA setting" key is added to the
menu screen of the system setting or the key operator pro-
gram.
2
Quantity
1
1
MX-M503N MX-AMX3 26 – 1
2) Service Manual When "OSA setting" key is touched, the menu below is dis-
played.
3) When [External Account Setting] key is touched, the screen for
setting the calculation by the external application and for
enabling user authentication is displayed. (The two settings
are linked together.)
• When the check box of [External Account Management is
Enabled] is checked:
The result of the job completion is notified to the external
application set on the Web page. (The default is "Disabled.")
• If the check box is OFF, check cannot be made.
• When the check box of [Authentication by the External
Account Application is Enabled] is checked:
When the machine is booted, the login screen can be
acquired from the application set on the Web page. (The
default is "Disabled.")
4) After setting, when [OK] key on the force account setting
screen is touched, the message to urge rebooting of the
machine is displayed. To enable the setting, touch [OK] key
and reboot the machine.
B. Set the external application.
1) Click [Login] button on the right upper side of the Web page.
2) Select [Administrator] from [Login Name] and enter the pass-
word.
3) Click [External Application Setting] on the menu frame.
4) Click [External Account].
5) Set the external account application.
• For each setting item, refer to [HELP]. To enable the setting
on the Web page, reboot the machine.