Unpacking - Sharp MX-M283N Installation Manual

[3] MX-LCX1
MX-M503N
1.

Unpacking

A. Removal of the large capacity tray unit
B. Removal of the fixing material and packing
parts
1) Remove the fixing material.
2) Remove the fixing material and the packing parts.
3) Service Manual Remove the paper feed desk fixing screw.
NOTE:
Before turning on the power, check to insure that the fixing
screw of the tray is removed. If the power is turned on
without removing the fixing screw, a trouble may be
resulted.
C. Check the packed items
1) Check that all the items are included in the package.
No.
1 Mounting plate upper
2 Connection unit
3 Fixing screw A (Hexagon with seat, S-tight, M4 x 35)
4 Fixing screw B (Hexagon with seat, S-tight, M4 x 12)
5 Fixing screw C (screw 4 x 8 cup)
2. Installation
<Note before installation>
* Before starting installation, check to insure that the data lamp on
the operation panel does not light up or blink.
A. Turn off the power of the main unit
1) Turn OFF the power switch on the operation panel.
MX-M503N MX-LCX1 3 – 1
1 3
2 5
Names of bundles
4
Quantity
2
1
4
2
1