Additional Functions; Delay Start - Miele G 8050 Operating Instructions Manual

Additional functions

Delay start

The starting time of a programme can
be delayed, e.g. to benefit from
economy rates of electricity. A delay
start time of between 30 minutes and
24 hours can be selected.
With a delay start time of between 30
minutes and 9 hours 30 minutes, the
delay is set in 30 minute stages. For 10
hours or more it is set in one hour
stages.
^ Switch the dishwasher on with the
On/Off button I-0.
The Start/Stop indicator light h/f will
flash.
^ Use the programme selector buttons
%/$ to select a the programme
you want.
^ Press the Delay start button d.
The delay start time which was set the
last time the delay start function was
used will then appear in the display in
hours and minutes. The "Delay start" d
indicator light will come on.
^ Press the "Delay start" button d
repeatedly until the delay start period
you want shows in the display. If the
button is kept pressed in, the time will
increase or decrease automatically.
Pressing the "Delay start" button d
again when a delay period of 24^ is
showing in the display switches the
function off.
The duration of the programme
selected will appear again in the
display.
Note:
You can now select the DRYING
additional function (see next page).
^ Press the h/f button.
The h/f light will come on.
The time starts counting down until the
programme start time: in 1 hour steps
for delay start periods of over 10 hours,
and in minutes for delay start periods of
under 10 hours.
At the end of the delay period, the
programme selected begins
automatically. The time left for a
programme to run then shows in the
display, the d indicator light goes out.
Operation
33