Cleaning The Wash Cabinet; Cleaning The Door And The Door Seal; Cleaning The Control Panel - Miele G 8050 Operating Instructions Manual

Cleaning and care

Cleaning the wash cabinet

The wash cabinet is largely
self-cleaning, provided that the correct
amount of detergent is always used.
Limescale or grease deposits in the
cabinet can be removed with a
proprietary dishwasher cleaner,
available from good retail outlets.
Cleaning the door and the door
seal
^ Wipe the door seals regularly with a
damp cloth to remove food deposits.
^ When the dishwasher is being
loaded, food and drink residue may
drip onto the sides of the dishwasher
door. These surfaces are outside the
wash cabinet and are not accessed
by water from the spray arms. Any
soiling should be wiped off these
surfaces before the door is closed.
E-Cloth
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals.

Cleaning the control panel

,
Do not use abrasive cleaning
agents, glass cleaning agents or all-
purpose cleaners. Because of their
chemical composition they could
cause serious damage to surfaces.
44
Plastic panels:
^ This type of control panel should only
be wiped with a damp cloth or
suitable cleaning agent designed for
use on plastic.
Stainless steel panels:
^ Control panels made of stainless
steel should be cleaned using a
damp cloth and a little washing up
liquid, or a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel (do not use
it on the controls).
^ To help prevent re-soiling, a
proprietary conditioning agent for
stainless steel, such as Neoblank
(available from the Miele Spare Parts
Department) can also be used.
Aluminium panels:
^ Clean aluminium panels with a damp
cloth and a little washing up liquid.
Aluminium is affected by the way that
light falls on it, by the surrounding
environment and by the angle you
observe it from.
,
Stainless steel and aluminium
surfaces and controls are
susceptible to scratching and
abrasion, and must be treated with
due care. They may suffer
discolouration or damage if soiling is
left on them for too long.
Remove soiling immediately.