Additional Functions - Miele PG 8504 Operating Instructions Manual

Additional settings
78

Additional functions

You can use this menu to customize the current program to suit tech-
nical requirements and the wash items or to reset all additional func-
tions to the factory default settings.
Additional specialist knowledge is required to alter program settings
and this should therefore be performed only by experienced users or
by Miele Customer Service.
Changing program parameters on a validated machine will require a
new performance validation.
Open the Additional settings

the  button and then switch it on again with the  button while
keeping the  button pressed.
Open the menu as follows:

Additional settings

Additional functions

Reset
-
All parameters that have been set under "Additional functions" will
be reset to the factory default setting.
Increased water level
-
The water level will be increased for all programs.
Interim rinse
-
All programs that incorporate this option will have an extra interim
rinse stage (see the program chart).
Dispensing system
-
Priming the dispensing system and renaming it.
Temperature / Time
-
Adjust the temperature and holding time for the Main wash or Final
rinse program block.
Use the  and  arrow buttons to select an option and confirm

your selection with OK.
See the next section for details of how to continue.
menu by switching the machine off with
Additional functions
Reset
Increased water level