Miele G 8050 Operating Instructions Manual page 49

Commercial dishwasher
Table of Contents

Advertisement

Problem
Three horizontal bars
show in the Time left
display at the end of the
programme: - - -
Knocking noise in the
wash cabinet.
Rattling noise.
Knocking noise in the
water pipes.
Possible cause
There may be a technical
fault.
The spray arm is
knocking against an item
in the basket.
Items of crockery are
insecure in the wash
cabinet.
This may be caused by
the on-site installation or
the cross-section of the
piping.
Problem solving guide
Remedy
– Press the "Start/Stop"
button for at least one
second.
– Switch the dishwasher
off using the "On/Off"
button.
After a few seconds:
– Switch the dishwasher
on using the "On/Off"
button.
– Then use the
programme selector
buttons to select the
programme you wish to
use.
– Press the "Start/Stop"
button
If the three horizontal
bars appear again at the
end of the programme,
there is a technical fault.
– Call the Miele Service
Department.
Interrupt the programme
and rearrange items
which are obstructing the
spray arm.
Interrupt the programme
and rearrange the items
of crockery.
This has no influence on
dishwasher function. If in
doubt contact a suitably
qualified plumber.
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 8051

Table of Contents