Switching On; Selecting A Programme; Starting A Programme - Miele G 8050 Operating Instructions Manual

Switching on

^ Make sure the spray arms are not
obstructed.
^ Close the door.
^ Open the stopcock, if it is closed.
^ Press the On/Off button I-0.
The Start/Stop indicator light h/f will
flash and the indicator light next to the
last programme selected will also come
on.

Selecting a programme

Choose your programme according to
the type of load, and the degree of
soiling.
The different programmes and their
uses are described in the programme
chart at the end of this booklet.

Starting a programme

^ Please refer to the programme chart
before selecting a programme.
^ Then use the programme selector
buttons %$ to select the
programme you wish to use.
The duration of the programme
selected will appear in the display in
hours and minutes.
Use the % button to scroll down
through the programmes.
Use the $ button to scroll up through
the programmes.
The indicator light next to the
programme selected will come on.
Operation
29