Special Function 2; Increasing The Water Level - Miele G 8050 Operating Instructions Manual

Commercial dishwasher
Table of Contents

Advertisement

Special function 2

Increasing the water level

For future servicing work, please
document any alterations to the stan-
dard factory settings.
Enter any alterations in the relevant
Value set:
It is not possible to alter the water
level while a programme is running.
You will have to cancel the
programme first. The h/f indicator
light must be flashing.
The amount of water taken into the
machine at each intake can be
increased by 20 %.
^ Switch the dishwasher off with the
On/Off button I-0.
^ Press the +c and h/f buttons in
and whilst holding them in switch
the dishwasher on with the On/Off
button I-0.
Then release these buttons.
The "Main wash/Rinses" l indicator
light will come on and the "Salt" k
indicator light will flash.
If this does not happen, start the
procedure from the beginning again.
The set water hardness will then appear
in the display.
Programming special functions
box.
^ Press the +c button twice.
To start with, Special function 1 "final
rinse temperature increased" is
selected and will be shown in the
display in double digits (10 or 11).
^ Press the % until 20 or 21 appears in
the display.
The 1 indicator light will come on to
show that you are in programming level.
The y indicator light will come on or
will flash to show that you are in Special
programme 2.
The k indicator light will flash.
Special function 2 "Water level" is
selected and will be shown in the
display in double digits.
20
Water level increased OFF.
The z indicator light will flash.
21
Water level increased ON.
The z indicator light will come on
(20% more water will be taken into
the machine at each water intake).
The first figure is the number of the
Special function. The second figure
shows whether or not the function is
activated.
You can now use the +c button to
switch the increased water level
function on or off.
You can use the %$ programme
selector buttons to select either
Special function 1 or Special function
2. (10 or 11 to 20 or 21 in the display)
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 8051

Table of Contents