Salt Indicator - Miele G 8050 Operating Instructions Manual

As the salt reservoir is filled, displaced
water will overflow.
^ Clean any excess salt from around
the reservoir opening and then screw
the cap on again firmly.
^ Run the COLD I programme imme-
diately to remove any traces of salt
water from the cabinet.

Salt indicator

The salt indicator light comes on to
notify you that the reservoir is empty.
^ The reservoir should then be refilled
with dishwasher salt.
(See: Filling the salt reservoir).
After the reservoir has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is run. The salt indicator
light may still be illuminated during this
process. It will go out once the salt
concentration has reached the correct
level.
Before using for the first time
Note
If the water in your area is very soft and
constantly lower than 0.7 mmol (4 °d)
you do not need to add salt to the
reservoir. The salt indicator light,
however, will still come on, but should
be ignored.
The salt refill indicator light is also used
as a programming interface point by
service technicians. See "After sales
service" for details of this.
17