Miele G 8050 Operating Instructions Manual page 9

Do not allow any remains of acids
or solvents, and in particular
hydrochloric acid or chloride solutions,
to get into the wash cabinet. Similarly
avoid any materials with a corrosive
effect.
The presence in compounds of any
solvents should be minimal (especially
those in hazard class A1).
To avoid any corrosion damage,
ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine.
Please follow the advice on
installation in these instructions
and the separate Installation
Instructions.
Accessories
Only use genuine Miele
accessories with this machine.
Consult Miele on the type and
application of such equipment.
Warning and Safety instructions
Disposal of your old machine
Before disposing of your old
machine, first make it unusable.
Disconnect it from the mains, cut off the
cable near the machine and cut off and
render any plug unusable.
For environmental and safety reasons
ensure the machine is completely
drained of any residual water and
cleaning agent. (Observe safety
regulations and wear safety goggles
and gloves).
Make the door lock inoperative, so that
children cannot accidentally shut
themselves in. Then make appropriate
arrangements for the safe disposal of
the machine.
For tank system machines ensure that
any water is emptied out of the tank.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
9