Interrupting A Programme; Changing A Programme - Miele G 8050 Operating Instructions Manual

Operation

Interrupting a programme

A programme is interrupted as soon as
the door is opened.
If the door is closed again, the
programme will continue from the point
it was at before the door was opened.
,
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Then close the
door firmly making sure that it clicks
into place.
32

Changing a programme

Important:
If the detergent dispenser flap has
already opened, do not change the
programme.
If a programme has already started and
you wish to change it, proceed as
follows:
^ Press the Start/Stop button h/f for
at least one second.
The programme will be cancelled and
the Start/Stop indicator light h/f will
flash.
^ Then use the programme selector
buttons %$ to select a different
programme.
The indicator light next to the
programme selected will come on.
^ Select the "Drying" and "Delay start"
additional functions again if wished
(see "Additional functions").
^ Press the Start/Stop button h/f.
The programme will begin.