At The End Of A Programme; Switching Off; Unloading The Dishwasher - Miele G 8050 Operating Instructions Manual

At the end of a programme

0 appears in the display when the
programme has finished.
The dishwasher can now be opened
and unloaded (see "Unloading the
dishwasher").
For safety's sake it is always advisable
to switch the dishwasher off if you do
not wish to start another programme im-
mediately.
Drying fan running time:
During the drying phase, as long as
the door of the dishwasher remains
closed, moist air is expelled through
the ventilation outlet for the drying
fan. To prevent the risk of steam
damage to the worktop edging
above the dishwasher, you can
select the "Drying" +c additional
function before starting the
programme. The drying fan will then
run for longer after the end of the
programme until the door is opened
(up to a maximum of 45 minutes
after the programme has finished).

Switching off

At the end of a programme:
^ Press the On/Off button I-0.
The Start/Stop indicator light h/f will
go out.
The dishwasher continues to use
electricity until switched off using the
On/Off button.
If the dishwasher is not to be used for a
longer period of time, e.g. whilst on
holiday, the stopcock should be turned
off.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they
are comfortable enough to handle
before unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
^ First unload the lower basket, then
the upper basket.
This will prevent water drops from the
upper basket from falling onto the
dishes in the lower basket.
Operation
31