Table of Contents
Advertisement
Initial commissioning
Salt refill indicator
Fill the salt reservoir with dishwasher
salt when
Refill salt
display.
Confirm with OK.
The salt refill indicator will go out.
Danger of corrosion!
Run the Cold pre-rinse program
without a load immediately after hav-
ing filled the reservoir with salt in or-
der to dilute any brine which may
have overflowed and have it pumped
away.
24
appears in the
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. In this
case, still confirm the message with OK.
The salt refill indicator will be turned off
if you have programmed the dishwasher
for a water hardness below 5 gpg (5 °d).
If you do not want the refill reminders
to appear, you can switch off both re-
fill reminders for salt and rinse aid if
you wish (see "Settings menu –
Switching off the refill reminders").
Advertisement
Table of Contents
