Salt Refill Indicator; Reactivation Notification; Machine Blocked If Salt Is Not Available - Miele PFD 401 Marine Operating Instructions Manual

Filling the container for dishwasher salt

Salt refill indicator

If the level in the salt container is low and a
reactivation is carried out, the following
message appears on the display:

Refill salt -appliance will
be disabled shortly.
Information
Confirm the message with OK.

Fill the salt container as described.

If the message is being displayed for the
first time, further programme runs may be
possible depending on the set water
hardness. If no salt is added, the message
is displayed again at the end of every
programme.

Reactivation notification


Approx. wash cycles
left until reactivation.
Information
You can set how many cleaning cycles in
advance you want to be notified of the
upcoming reactivation, see "Extended
settings", "Reactivation notification".
28
Machine blocked if salt is not
available
If the salt in the water softener has been
used up, a fault appears on the display and
the machine blocked from performing
further applications.
OK
Acknowledge the fault by tapping on the
warning symbol. Then follow the
instructions on the display:

Information
Fill the salt container as described.

The machine lock is lifted with a delay of a
few minutes once salt has been added.
OK

F561 Machine blocked
insufficient salt: refill
dishwasher salt. Machine
will unlock after a few
seconds. Then start the
"Cold" programme.
OK