Log Utilities - Toshiba T4400SXC Maintenance Manual

3.18 Log Utilities
3.18.1 Program Description
This program logs error information generated while a test is in progress and stores the results
in RAM. This program can store data on a floppy disk or output the data to a printer. If the
power switch is turned off, the error information will be lost. The error information is dis-
played in the following order:
1. Error count (CNT)
2. Test name (TS-NAME)
3. Subtest number (TS-NAME)
4. Pass count (PASS)
5. Error status (STS)
6. FDD/HDD or memory address (ADDR)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name
3.18.2 Operations
3-40
1. Selecting 5 and pressing Enter in the Diagnostics Menu, logs error information
into RAM or on the floppy disk. The error information is displayed in the
following format:
CNT
001
001
XXXXX ERRORS
T-NAME PASS STS
ADDR
FDD 02 0000 103 00001
FDD 01
TO
180 0
1
001
Address
Error statu
Pass count
Subtest number
Test name
Error count
WD
00
00
RD HSTS
[STATUS NAME]
00 FDD - WRITE PROTECTED
00 FDD - TIME OUT ERROR
HDC status
ead data
rite data
Error status name
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
[[1:Ne:Prev,3:Exit,4:clear,5:Print,6:Fdlog read,7:FD log write]]