Toshiba T4400SXC Maintenance Manual page 124

5. Remove the BIOS ROM from the socket.
Figure 4-41 Removing the BIOS ROM
Installing the BIOS ROM
To install the BIOS ROM, follow these steps:
4-40
1. Align the BIOS ROM (A) with the BIOS ROM socket (B). Note, the notch (C)
on the left side of the BIOS ROM and the notch (0) on the BIOS ROM socket.
These notches indicate the correct position of the BIOS ROM.
(C)
Figure 4-42 Align the BIOS ROM
2.
Align the left edge of the plate and socket. Firmly press down the plate until it
is seated.
Figure 4-43 Align the plate