Table of Contents
Advertisement
3.22.3
Changing SETUP Values
You can change the setup options automatically or manually.
3-50
Automatic Reset
Follow these steps to set the values automatically:
1.
Press Home. This instructs the program to reset all the options to their factory
preset values.
The program calculates how much base and extended memory your T4400SXC
has, based on whether or not you have expansion memory card installed.
The T4400SXC SETUP menu displays the new values.
2.
ConfIrm that the new values are correct. To change any option(s), go to the
next item, Manual Reset.
3.
If the new values are correct, press End to record the new values in
configuration memory.
4. Go to step 5 of the next item, Manual Reset.
Manual Reset
Follow these steps to change any option(s) manually:
1.
Notice the cursor (reverse display highlight bar). This cursor indicates which
option is selected for change.
2.
Use the arrow keys to move the cursor between options. You can also select
each option group by pressing the character on the keyboard corresponding to
the fIrst character of the heading for each option group. For example, if you
press D, the cursor moves to the top of the option group, DISPLAY.
3.
When the cursor highlights the value of an option you want to change, use the
space and backspace keys to select alternate values.
4.
When you finish making changes, press End to record the new values in
confIguration memory.
5.
SETUP displays the following message:
Save Settings And Reboot? (YIN)
Review your changes.
If
you need to make more alterations, press N and go
back to step 2.
6.
If the new values are correct, press Y. They are recorded into CMOS memory
and the system restarts.
In case you registered a power on password on the T4400SXC, SETUP
displays this message along with the message above. Refer to the section
"Power on Password" in this manual to register a password.
Insert Password Disk if necessary.
Hide quick links:
Advertisement
Table of Contents
