Table of Contents
Advertisement
3.2
Executing the T4400SXC Diagnostic Test
MS-DOS is required to run the T4400SXC Diagnostic Test. To start the T4400SXC
Diagnostic Test Program follow these steps:
3-6
NOTE: To execute the test program, version 1.31 or later must be used.
1. Tum on the T4400SXC. Insert the T4400SXC Diagnostics Test disk in the
T4400SXC's internal floppy disk drive.
2. At the system prompt change to drive A, type
TESTCE44
and press
Enter.
The following menu will appear:
TOSHIBA personal computer T4400SX DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 1991, 92
DIAGNOSTICS MENU
1 - DIAGNOSTIC TEST
2 - HARD DISK FORMAT
3 -
4 - HEAD CLEANING
5 - LOG UTILITIES
6 - RUNNING
TEST
7 - FDD UTILITIES
8 - SYSTEM CONFIGURATION
9 - EXIT TO MS-DOS
o -
SETUP
PRESS [0] -
[9] KEY
Sections 3.16 through 3.22 provide detailed descriptions for each of the
T4400SXC Diagnostic Menu options.
NOTE: To exit the T4400SXC Diagnostic test program press Clrl+C.
If
a test
program is in progress, press Clrl+Break to exit the test program.
Hide quick links:
Advertisement
Table of Contents
