Toshiba T4400SXC Maintenance Manual page 116

4.12 The Display Mask
Removing the Display Mask
To remove the T4400SXC's display mask, follow these steps and refer to figures 4-27:
1. Tum off the power to the T4400SXC, disconnect the AC adapter, power cord
and all cables connected to the T4400SXC.
2. Remove the battery pack as described in section 4.2.
3. Open the display panel.
4.
Remove the two stick-on labels (A) from the display supports and the two
rubber cushions (B) from the top comers of the display panel to expose the
four screws (C) securing the display mask (0). Refer to figure 4-27.
5. Remove the four screws (C) (M2x5 silver) securing the display mask to the
display cover.
6.
Unsnap the nine latches securing the display cover as shown in figure 3-27.
(C) M2x5 silver
Figure 4-27 Removing the display mask screws
Assembling the Display Mask
To assemble the T4400SXC's display mask follow these steps:
4-32
1. Align the mask on the display panel, being careful not to damage the portion of
the mask that covers the hinges.
2. Snap the nine latches on the mask in place. Check to make sure the seam
between the front and the back of the display is evenly seated around the
display.
3.
Secure the mask in place with the four screws (M2x5 silver) removed in step 5
and cover the screws with the rubber cushions on the top of the display and the
stick-on labels on the bottom of the display.