Toshiba T4400SXC Maintenance Manual page 81

If you create a password service disk, insert a disk in drive A before pressing
Y. When you press Y, the FDD disk-in-use light glows and the password
service disk is created. When the creation of the password service disk is
completed, the FDD disk-in-use light goes off and this message appears.
Remove the Password Service Disk and press any key.
Remove the password service disk from the disk drive and press any key. The
new values are recorded into CMOS Memory and the system restarts. Save the
password service disk in safe place. The password service disk will help you
to startup the computer when you forget the password.
CAUTION: You can use either unformatted or formatted diskfor a
password service disk. Be careful not to use a disk containing data, or you
loose all data on the disk.
3.22.4 SETUP Option Descriptions
This subsection explains the possible values for each SETUP option.
Memory
Total Amount of Built-in Memory
The SETUP program calculates the total amount of memory that is built in to the
T4400SXC and displays it. This is only for your information and cannot be changed.
Base Memory
The SETUP program displays the amount of base memory, 640 KB. This is for your
information only and cannot be changed. Base memory is also called conventional
memory in other sections of this manual.
Extended Memory
The SETUP program calculates the amount of extended memory. This is only for
your information and cannot be changed.
Hard RAM
This option configures part of extended memory as Hard RAM. To configure Hard
RAM, you can choose from 128 KB to a maximum of 19712 KB in 64 KB
increments. The default value is 0 KB.
3-51