Assembling the Hard Disk Drive
To install the hard disk drive in the T4400SXC follow these steps:
1.
Align the HDD bracket with the four holes on the side of the HDD. Refer
to
figure 4-24.
2.
Install the four screws (M3x4) removed in step 6 to secure the HDD bracket to
theHDD.
3.
Place the HDD and its bracket in the T4400SXC. Connect the HDD cable to
theHDD.
4.
Secure the HDD in place with the four screws (M2x5 silver) removed in step
3. Refer to figure 4-23.
4-29