Set Active_Mmb; Set Date - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
2.2 Setting Commands

2.2.12 set active_mmb

By resetting Active MMB, switch over to Active MMB.
This command is a command that assumes the case where it does not connect with Active MMB (Even CLI
is not good at login either), and executes it from Standby MMB.
Do not execute this command with Active MMB because it does not support execution with Active MMB.
Remarks

This command can be executed by connecting to Standby MMB.

It is different from Switch Over function of MMB Web-UI.

Privilege: Administrator, CE
(1) Input format
set active_mmb {quiet}
(2) Option
quiet: Command is executed without interacting with the user.
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540).
Are you sure to continue set active mmb? [y/n]:
The specified parameter is invalid.
set active_mmb failed.
Unable to execute this command on a Active MMB.
The specified MMB#x is NOT present.
The specified MMB#x is disabled.

2.2.13 set date

Set the date and time.
The set format is as following.

MM : Month (01~12)

DD : Date (1~28|29|30|31)

hh : Time(00~23)

mm : Minutes(00~59)

CC : First two digits of the year (option)

YY : Last two digits of the year (option)

SS: Seconds (option)

Privilege: Administrator
(1) Input format
set date MMDDhhmm{{CC}YY}{, SS}
(2) Option
None
371
CA92344-0539-04