Table 1.105 Setting And Display Items In The [Network Protocols] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Hide thumbs Also See for PRIMEQUEST 2000 Series:
Table of Contents

Advertisement

MMB Web-UI (Web User Interface) Operations
1.5 [Network Configuration] Menu

TABLE 1.105 Setting and display items in the [Network Protocols] window

Items
Web (HTTP/HTTPS)
HTTP
Sets Enable or Disable for HTTP.
The default is Disable.
HTTP Port#
Sets the port number used for HTTP.
The default is 8081.
HTTPS
Sets Enable or Disable for HTTPS.
The default is Disable.
HTTPS Port#
Sets the port number used for HTTPS.
The default is 432.
Timeout
Sets the length of time before a time-out due to no input causes the termination of an
HTTP or HTTPS connection.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
Remarks
When Dialog Box is displayed, the no time-out is not applied even if 0 is set.
Telnet
Telnet
Sets Enable or Disable for Telnet.
In case of PRIMEQUEST 2400E2/2800E2/2800B2
The default is Enable.
In case of PRIMEQUEST 2400E/2800E/2800B
The default is Disable.
Telnet Port#
Sets the port number used for Telnet.
The default is 23.
Timeout
Sets the length of time before a time-out due to no input causes the termination of a
Telnet connection.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
SSH
SSH
Sets Enable or Disable for SSH.
The default is Disable.
SSH Port#
Sets the port number used for SSH.
The default is 22.
Timeout
Sets the length of time before the SSH connection is timed out.
You can specify 0 or a value in a range of 60 to 9999.
0 means there is no time-out.
The default is 600 seconds.
SNMP
SNMP Agent
Sets Enable or Disable for SNMP Agent.
The default is Disable.
Agent Port#
Sets the port number used for SNMP Agent.
The specifiable port numbers are 161 and integers from 1024 to 65535.
The default is 161.
SNMP Trap
Sets Enable or Disable for SNMP Trap.
The default is Disable.
Trap Port#
Sets the port number used for SNMP Trap.
The specifiable port numbers are 162 and integers from 1024 to 65535.
The default is 162.
Remarks
Description
240
CA92344-0539-04

Advertisement

Table of Contents
loading

Table of Contents