Figure 6.11 [Select Device] Menu; Table 6.13 Displayed Contents Of Menu Selection Area; Table 6.14 Displayed Contents Of The Help Display Area For Operation - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Setting of sadump environment
6.8 [Select device] Menu
6.8
[Select device] Menu
This is displayed when [1], [2] or [3] is set in the [Setting dump device] menu.
Dump devices on the current system is listed. Select a dump device from a list.
In case of multiple disk configurations, select the 1st dump disk.
Item
ACPI name of dump
device
TABLE 6.14 Displayed contents of the help display area for operation
Item
↑↓=Move Highlight
<Enter>= Select Entry
Note
[Esc] key is displayed on the screen but don't operate it.
FIGURE 6.11 [Select device] Menu
TABLE 6.13 Displayed contents of menu selection area
ACPI name of disk/partition is displayed.
Selected dump device is highlighted.
Move the cursor up or down.
Select the dump device on the cursor, and return
back to [Setting dump device] menu.
Description
Description
693
CA92344-0539-04
Advertisement
Table of Contents
