Table 6.10 Displayed Contents Of The Help Display Area For Operation - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
Setting of sadump environment
6.6 [Select device] Menu
TABLE 6.10 Displayed contents of the help display area for operation
Item
↑↓=Move Highlight
<Enter>= Select Entry
Note
[Esc] key is displayed on the screen but don't operate it.
- A dump device is initialized when it is created. It takes a time to initialize, depends on the size of selected
disk or disk partition. In some cases it takes more than several minutes until going to the next screen.
Description
Moves the cursor up or down
Create dump device with selected disk or disk
partition, and go to dump device create menu.
If [Exit] is selected, go to dump device create menu
without creating dump device.
690
CA92344-0539-04
Advertisement
Table of Contents
