Show Raid Logical_Drive_Count - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB CLI (Command Line Interface) Operations
2.3 Commands for Display
Internal error [%d:%d].
The operation is failed. %s
Unable to execute the command because the %s is under maintenance.
2.3.51 show raid logical_drive_count
Displays logical drive counts attached to the specified RAID adapter.
Privilege: Aｌｌ
(1)
Input format
show raid logical_drive_count [SB | DU | IOU | PCI_BOX] <UNIT#>-<PCISLOT#>
(2)
Option
None.
(3)
Usage example
Example: When you display logical drive count attached to the RAID adapter on SB#0.
# show raid logical_drive_count SB 0-0
2
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (CA92344-0540)..
Too much arguments argc=%d.
Too few arguments argc=%d.
The specified parameter is invalid. %s
The specified controller is not found.
Internal error [%d:%d].
The operation is failed. %s
Unable to execute the command because the %s is under maintenance.
479
CA92344-0539-04
Advertisement
Table of Contents
