®
Invacare
- PRONTO M41
8.13
Footboard
8.13.1 Removing/Installing the footboard assembly
WARNING!
Pinch point may occur when rotating the footboard assembly.
Removing the footboard assembly:
●
Remove the quick release pin (2) that secures the footboard assembly (4) to the wheelchair
frame by depressing the button while sliding the pin out.
●
Remove the footboard assembly (4) from the wheelchair frame.
Installing the footboard assembly:
WARNING!
Make sure the detent balls (3) of the quick-release pin (2) are fully released beyond the
outer edge of the tube (5) before operating the wheelchair. Otherwise, injury and/or
damage may result. Keep detent balls clean.
●
Position the footboard assembly (4) onto the wheelchair frame so that the mounting hole (1) in
the wheelchair frame aligns with the desired mounting hole (1) in the footboard assembly (4).
●
Install the quick release pin (2) by depressing the button while sliding the pin in. Ensure that the
detent balls (3) are engaged with the outer edge of the tube (5).
SERVICE MANUAL
91