Seat System; Captain's Seat/Standard Seat; Removing/Installing The Seat Assembly - Invacare Pronto M41 Series Service Manual

SERVICE MANUAL
8.9

Seat system

8.9.1

Captain's seat/standard seat

WARNING!
After any adjustments, repair or service and before use, make sure that all attaching
hardware is tightened securely - otherwise injury or damage may result.
● Before performing any maintenance, adjustment or service verify that ON/OFF switch on the
joystick is in the OFF position.
8.9.1.1

Removing/Installing the seat assembly

Removing the Seat Assembly:
● Disconnect the joystick, as described in chapter 8.2.3.
● Pull the release lever to fold down the seat back (1).
● Pull the seat lever (5) up and lift the seat assembly (2) up and away from the seat post (4).
Installing the Seat Assembly:
● Align the seat pivot (3) with the seat post (4).
● Pull the seat lever (5) up and lower the seat assembly (2) on the seat post (4).
Note
If necessary, slightly twist seat assembly back and forth to lock it in place.
● Release the seat lever (5).
● Pull the seat assembly (2) up to ensure that it is locked in place.
● Connect the joystick, as described in chapter 8.2.3.
66
®
Invacare - PRONTO M41