SERVICE MANUAL
8.1.3
Removing/Installing the rear cover
Requirements:
● Slotted screwdriver
● Phillips screwdriver
Removing the rear cover:
●
Remove the two screws (2) that secure the rear cover (4) to the frame (3).
●
Remove the rear cover (4).
Installing the rear cover:
●
Insert the tabs at the bottom of the rear cover (4) into the slots in the bottom of the
frame (3).
●
Secure the rear cover (2) to the frame (3) using the two screws (2).
Do not overtighten.
38
®
Invacare
- PRONTO M41