Checking The Cables - Invacare Pronto M41 Series Service Manual

®
Invacare - PRONTO M41
8.8.2

Checking the cables

● Switch the electronics OFF on the remote.
● Remove the rear and top cover as described in chapter 8.1.1 and chapter 8.1.3.
● Move the seat into the service position (Modulite seat) as described in chapter 8.9.2.1
● Check all cables for visible damage, crushing points or abrasion points.
● Replace damaged cables.
● Pull on each plug carefully. The plug must not come out of its socket when pulled on lightly.
● If a plug is loose, apply slight pressure to push the plug into the socket. The plug must snap in
place securely.
● Check that the plug is firmly attached to its socket.
● Remove the batteries as described in chapter 8.7.3.
● Check the battery cables for visible damage, crushing points or abrasion points.
● Replace damaged cables.
● Assemble all parts again in reverse order.
● The last step is to test all functions of the vehicle.
SERVICE MANUAL
65