Removing/Installing Batteries - Invacare Pronto M41 Series Service Manual

SERVICE MANUAL
8.7.3

Removing/Installing batteries

Requirements:
● 7/16" (6PT) Box Wrench
● Diagonal Cutters
WARNING!
Injury hazard due to discharged acid.
● Always use the battery handle when lifting the battery. It is the most convenient method and
assures that the battery acid will not spill. It also helps to prolong the life of the battery.
● Do not tip the batteries. Keep the batteries in an upright position.
Note
If there is battery acid in the bottom of the battery tray or on the sides of the battery, apply baking
soda to these areas to neutralize the battery acid. Before reinstalling the existing or new battery,
clean the baking soda from the battery tray or battery being sure to avoid contact with skin and
eyes. Determine source of contamination.
Never install/reinstall a battery with a cracked or otherwise damaged case.
1 Seat (Standard or Captain's)
Seat service position
(Modulite only)
2 Cover
3 Batteries
4 Battery tray
58
5 Left battery
6 Black connector to power
module
7 Batteries 30-34 Ah (C20)
8 Right battery
®
Invacare - PRONTO M41
9 Black connectors
10 Red connectors
11 Plug into power module