Connecting The Vps With The Panasonic Kx-Td816 And Kx-Td1232; Kx-Td1232 Software Verification And Programming For Dpt Integration Via The Manager's Extension - Panasonic KX-TVP50 Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
4.3 CONNECTING THE VPS WITH THE
PANASONIC KX-TD816 AND KX-TD1232
Notes
• Do not use system programmes [106] or [602] for DPT Integration.
• The next 2 sections (4.3.1 KX-TD1232 Software Verification and Programming for DPT
Integration via the Manager's Extension and 4.3.2 KX-TD1232 Software Verification and
Programming for DPT Integration via the Operating and Maintenance Tool) are for the KX-
TD1232 as examples. Please refer to them for the KX-TD816.
4.3.1 KX-TD1232 Software Verification and Programming for DPT
Integration via the Manager's Extension
It is important that the KX-TD1232 has the proper software level to allow DPT Integration with
the VPS. Follow the procedures below to confirm the software level, then complete the required
programming before starting up the VPS.
Note
Two methods of programming are available on the KX-TD1232. The instructions below
show how to program without the operating and maintenance tool. For instructions on
programming with the operating and maintenance tool, please see 4.3.2 KX-TD1232
Software Verification and Programming for DPT Integration via the Operating and
Maintenance Tool.
All of the following procedures must be done after entering system programming. Refer
to the KX-TD1232 Programming Guide or Installation Manual for instructions on how
to enter the system programming mode.
Software Verification
1.
Verify Software—If you are configuring a 2-cabinet system, remember to check both
cabinets. The software must be the same in each. Check the software version of the KX-
TD1232 using System Programme [116].
Example: P231UYMMDDA
The underlined digits represent the software production date code (year, month, day). For
DPT Integration, the software version of the PBX must be P231U or higher.
(For KX-TD816, the version must be P301O or higher.)
If the software version of the PBX is lower than this, you may not be able to utilize some
of the features available only with DPT Integration. For more information, consult your
dealer.
66 Installation Manual