Pbx Interface Parameters - Panasonic KX-TVP50 Installation Manual

3.2.4 PBX Interface Parameters

Dialling Parameters
• PBX Type:
Specifies the type of PBX which is connected to the VPS.
• Integration Mode:
Specifies the method of integration to be used between the VPS and PBX. If PBX type is set
to the Panasonic KX-T series, the Inband Signalling parameters are set automatically and
should not be altered. APT Integration is only available when a KX-TA series PBX is
connected and the software is upgraded. DPT Integration is only available when a KX-TD
series PBX is connected and the software is upgraded.
• Operator Transfer Sequence:
Tells the VPS how to transfer a call to the operator.
Example: FTX [hookswitch flash—dial tone—dial (operator) extn.]
• Extension Transfer Sequence:
Tells the VPS how to transfer a call to an extension.
Example: FTX [hookswitch flash—dial tone—dial extn.]
• Alternate Extension (Transfer Sequence):
Tells the VPS how to transfer a call to an extension that belongs to the "Alternate Extension
Group". This is useful for extensions that need a special transfer procedure (i.e., blind
transfer) such as modem extensions.
Example: FTXD [hookswitch flash—dial tone—dial extn.—hang up]
• Reconnect Sequence on Busy:
Tells the VPS how to return to the caller if the called extension is busy. PBXs differ in how
they handle this function. Test from an SLT to determine the sequence.
Installation Manual
INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Table 10
SEQUENCE CODES
D Disconnect
F Hookswitch Flash
R Ring Detection
S Silence Detection
T Dial Tone Detection
W Wait for 1 Second
X Dial Extension
A: Answer
Touchtone Digits
0-9, , #
45