Off-Line Set (Ofln); On-Line Set (Onln); Set Password (Pass) - Panasonic KX-TVP50 Installation Manual

7.2.1 Off-line Set (OFLN)

Use the OFLN command to turn off the VPS Call Progression Mode. Set the VPS to Off-Line
Mode before deleting a mailbox, since this operation involves the updating of a large number
of related parameters.
Type OFLN, then Press RETURN. If no VPS ports are in use, the VPS will immediately
suspend the Call Progression Mode.
$ OFLN
** OFF LINE MODE **
If any VPS port is in use, the VPS will display the following warning:
*** Now line is used!! *** <WAIT>
The following message indicates that the VPS is in the Off-Line Mode.
** OFF LINE MODE **

7.2.2 On-line Set (ONLN)

Use the ONLN command to place the VPS in the Call Progression Mode.
Type ONLN, then Press RETURN.
$ ONLN
** ON LINE MODE **

7.2.3 Set Password (PASS)

Use the PASS command to create, change and clear system passwords. Valid passwords are
created using up to 10 characters; any alphanumeric character, [(space)], [.] and [_] can be
used.
IMPORTANT
• We strongly recommend that you set the password to 10 characters for maximum
protection against hackers.
• Do not carelessly reveal the password to other persons.
• Please change the password periodically.
Installation Manual
SYSTEM MAINTENANCE AND TROUBLESHOOTING
127