Dpt Integration; Connection Example-Dpt Integration - Panasonic KX-TVP50 Installation Manual

Voice processing system
Hide thumbs Also See for KX-TVP50:
Table of Contents

Advertisement

VOICE PROCESSING SYSTEM OVERVIEW

1.4.4 DPT Integration

To the Panasonic KX-TD series PBX that uses DPT Integration, the VPS ports look like digital
extensions. The PBX thinks that the VPS is a digital phone, and the VPS mimics all actions of
a digital set. Another advantage of digital integration is that the 2B+D communication provides
2 VPS ports for each Digital Station port. Communication between the VPS and the PBX
through digital integration requires the proper software level in the PBX and 4-wire
connections for each port. To communicate between the VPS and the PBX through DPT
Integration, the PBX and VPS must be programmed to work together.
1.4.5 Connection Example—DPT Integration
For example, you can connect jack 15 of the KX-TD1232 to Port 1 of the VPS with a 4-wire
connection (see diagram below). This connection creates 2 Voice Mail extensions and can
simultaneously answer 2 calls. This means that a fully-configured 2-port system requires only
1 jack from the PBX.
When DPT Integration is activated, a single extension jack provides 2 single-line interfaces at
a Port on the VPS. For example, when 1 line cord (4 wire) is connected to Port 1 on the VPS,
2 extensions are provided.
22
15
KX-TD1232
VPS
Port 1
Extensions 165 and 166
Installation Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents