Panasonic KX-TVP50 Installation Manual page 175

FEATURE
Message Delivery
Status
Message Reception
Mode
Message Scan
Installation Manual
DESCRIPTION
allows a subscriber to check the status of
messages that have been sent. The sending
subscriber has the option of cancelling any of
the messages after checking their status. If a
recorded message has not been received, the
VPS will voice report the following: the
message's destination mailbox number and its
contents.
Message delivery status information is
automatically deleted after the message has
been received by the subscriber, or when the
subscriber cancels the delivery, or when a
new message arrives after 84 delivery status
messages have been stored in the subscriber's
mailbox (the oldest status message is always
deleted first).
allows incoming calls to be received by either
a subscriber's regular or interview mailbox.
This mode is effective for: (1) Incomplete
Call Handling Service (when the subscriber's
line is busy, or he cannot take the call, or
when he has enabled Call Blocking), and (2)
when the transfer destination of calls is set to
a Logical Extension.
permits the subscriber to scan the first 4 s of
each message. The subscriber can replay the
previous message, play the next message, or
play the entire message.
Table 32
• See 3.2 Checking Mailbox
• See "Interview Service" and
• See "All Calls Transfer to
• See 4.4 Message Reception
• See "Message Scanning with
• See C3 SETTING COS
• See "Scanning Messages" in
• See 2.1 Receiving Messages in
SYSTEM FEATURES
REFERENCES
Distribution in the Subscriber's
Guide.
"Logical Extension (All Calls
Transfer to Mailbox)" in this
Table.
Mailbox" in Table 35 in
B2 SYSTEM
ADMINISTRATION—
MAILBOXES.
Mode in the Subscriber's Guide.
Information" in Table 38 in
B3 SYSTEM
ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
(CLASS OF SERVICE)
PARAMETERS.
Glossary.
the Subscriber's Guide.
175