Backing Up The System - Panasonic KX-TVP50 Installation Manual

6.3 BACKING UP THE SYSTEM

1.
Choose the Utility Command. Type [SAVE], then Press ENTER. See screen output
below.
From System Administration Top Menu:
Enter The Number := 3 (Utility Command)
$ SAVE
VPS Flash Memory Data Save ( VPS -> PC : Xmodem )
1: Program
2: Parameters
3: System Prompts
4: User Prompts-1
5: User Prompts-2
6: Custom Service Menus
7: Personal Greetings
8: Company Greetings
Select No. : = 2
2.
To start, Press [2] and then ENTER.
3.
Press RETURN or ENTER.
Following steps are for HyperTerminal as an example.
4. Select Receive File from the Transfer Menu.
5. Specify a folder where data is to be saved (if necessary, use "Browse").
6. Select Xmodem as the protocol to save data.
7. Click "Receive".
8. Enter desired filename and click "OK".
The file transfer screen appears and shows download progress. Download time will vary
depending on the communication speed and file sizes.
"SAVE Completed" will appear on the screen when the file has been saved. Continue saving
the other items as needed. It is not necessary to save the "Program" because it is resident on
the flash memory (Master) and cannot be altered. We do recommend all other data be saved
including User Prompt 1 and User Prompt 2 (if they have been recorded).
Installation Manual
FINAL SETUP
121