Panasonic KX-TVP50 Installation Manual page 65

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
2.
KX-TA
series
TEST: Press the INTERCOM button and then [107]. If the VPS
answers, you have an APT connection.
Set the DIP Switch to position 0 after initialisation is complete.
The required programming is complete and the VPS and KX-TA series should be able to
communicate through Digital Integration.
When running the Quick Setup command (Section 5 CUSTOMISING THE SYSTEM) from the
VPS, the PBX transmits the station information automatically. This saves time when programming
the VPS.
Installation Manual
Change the extension numbers of both VPS port 1 and 2 for VPS2 from 107 and
108 to 115 and 116 (see "Extension Number of VPS Port 1" and "Extension
Number of VPS Port 2" in Table 72 in B7.3 PBX Interface Parameters).
Extension 106
6
7
8
15
16
VPS1
Mailbox for Extension 106
VPS2
Port 1
Extension 107
Port 2
Extension 108
Port 1
Extension 115
Port 2
Extension 116
65