Panasonic KX-TVP50 Installation Manual page 201

Parameter
Message
Scanning with
Information
Play System
Prompt after
Personal
Greeting
Use Call
Waiting
on Busy
Message
Cancel for Live
Call Screening
Installation Manual
Value Range
(Default)
1. Yes If set to "Yes", the VPS adds the message sender's name
2. No and the recording date and time to the message during
(No) the message scan.
1. Yes If set to "Yes", directions for recording a message are
2. No given to the caller immediately after the personal
(No) greeting has been played.
The following guidance messages are played:
"To end recording, hang up or press 1 for more
features".
"To pause and restart recording, press 2".
1. Yes If set to "Yes", the VPS signals the busy extension that
2. No another call is waiting.
(No)
Note: To use Call Waiting on Busy, you must also enable
the use of the Call Waiting feature at your PBX.
1. Yes The Live Call Screening feature permits the subscriber to
2. No monitor incoming messages as they are being recorded,
(Yes) or intercept them if desired. If the subscriber chooses to
speak to the caller, if not disabled by the PBX
beforehand, the VPS will record the two-way
conversation. If set to "Yes", the VPS will automatically
delete this recording.
The two-way conversation may be saved in the mailbox
if the PBX allows the conversation to be recorded. If set
to "No", the recording will be automatically saved.
Note: The Live Call Screening feature is available if
APT/DPT Voice Mail Integration is activated with a
Panasonic KX-TA series or KX-TD series telephone
system.
SYSTEM ADMINISTRATOR'S GUIDE
Table 38
Description/Function
201