Panasonic KX-TVP50 Installation Manual page 215

Operator's Parameters
Use these parameters to specify the operator's (operator 1, 2, 3) extensions and mailboxes, as
well as how to treat operator-seeking calls.
Operator's parameters can be individually set for Day, Night, Lunch and Break Modes.
To access the proper menu for Operator's Parameters, follow the menu path as
shown:
System Administration Top Menu-1-4-1-2
Operator's Parameters-Day Mode-Operator 1
Use this parameter to enable or disable the Operator Service. It specifies Operator 1's extension
and the treatment of the calls transferred to that extension. The extension number assigned for
Operator 1 in the Day Mode will be for the Message Manager. When Operator service is
enabled, operator-seeking calls first reach Operator 1's extension.
Notes
• Because the extension number assigned for Operator 1 in the Day Mode is for the
Message Manager, you cannot assign this extension to any other mailbox.
• By default, the extension number for the Message Manager's extension (assigned for
Operator 1 in the Day Mode) is "0". However, the default setting cannot be used with
the Message Waiting Notification—Lamp feature and the Remote Call Forwarding
Set feature. When using these features, You must assign the extension number that is
included in the Extension Numbering Plan.
To access the proper menu for Operator Parameters-Day Mode-Operator 1, follow
the menu path as shown:
System Administration Top Menu-1-4-1-2-1-1
Parameter
Operator
Service
Installation Manual
Value Range
(Default)
1. Disable Enables or disables the Operator Service feature.
2. Enable
(Enable)
Note: All non-touchtone input calls in Automated
Attendant Service will be transferred to the General
Delivery Mailbox when the Operator Service is disabled.
SYSTEM ADMINISTRATOR'S GUIDE
Table 43
Description/Function
215