Panasonic KX-TVP50 Installation Manual page 47

Code
(default)
7
8
9
#9
Digit Translation Table Parameters
These parameters allow PBXs that have a fixed Follow-on ID sequence to be used with the
VPS. For example, a Follow-on ID sequence of [
these parameters.
• Inter-Digit Time-Out: This parameter defines the interval of incoming signals (Follow-
on ID) from the PBX to the VPS. The Digit Translation Table applies the digits received
within this time to translation.
• Input-Output (up to 8 alphanumeric characters): When the system receives digits
within the inter-digit time, it checks them against the input table. If they are found, the
system utilises the output digits in their place.
The remainder of this section consists of step-by-step guides for software verification
and programming of the recommended Panasonic PBX systems.
If you have any problem as you go through this section, please consult your dealer.
Installation Manual
INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Call State
Forwarded to Voice The extension dialled is forwarded to Voice Mail and no
Mail (Busy) other Voice Mail ports are available to accept the call. (This
signals the Voice Mail port [usually Auto-Attendant] to let
the caller to leave a message.)
Forwarded to Extn. The extension dialled is forwarded to another non-Voice
Mail extension.
Confirmation Tone The Message Waiting Lamp On or Message Waiting Lamp
Off code is dialled successfully.
Disconnect The caller disconnects. The central office must set a CPC
signal to the PBX line for this signal to work for outside
calls.
Table 11
Sent to the Voice Mail Port When...
101] can be changed to [#6101] by using
47