Panasonic KX-TVP50 Installation Manual page 216

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Operator's
Extension
Operator's
Mailbox No.
Operator No
Answer Time
Busy Coverage
Mode
216
Value Range
(Default)
1-5 digits Specifies the extension number for Operator 1.
(0)
Note 1: The default setting (0) cannot be used with the
Message Waiting Notification—Lamp feature. An
extension number must be assigned that is included in the
Extension Numbering Plan.
Note 2: The extension number must not be assigned
anywhere else (in particular, the extension must not have
a mailbox). Otherwise, you will get an error message.
2-5 digits Callers to Operator 1 are prompted to leave a message in
(998) this mailbox depending upon how the Busy Coverage or
No Answer Coverage modes are set.
10-60 s When a call to Operator 1, 2, or 3 is not answered within
(30) the time set, the VPS will offer other options as defined by
the "No Answer Coverage Mode".
Note 1: This timer applies to Operator 1, 2, and 3.
Note 2: If more than 1 operator is assigned, we
recommend to reduce the time on the "Operator No
Answer Time" to 15 s.
1. Hold Specifies how to handle calls when the Operator 1
2. No Answer extension is busy.
Coverage
3. Call Waiting
1. Hold—Automatically places the caller on hold and the
4. Disconnect
Message
(Hold)
2. No Answer Coverage—Offers the option specified by
3. Call Waiting—Signals the Operator 1 when another
4. Disconnect Message—Disconnects the caller after
Table 43
Description/Function
Operator 1 extension is called again.
the No Answer Coverage Mode to the caller.
call is waiting using the Call Waiting feature of the
PBX.
playing "Thank you for calling".
Installation Manual