Nuts, Bolts, Fasteners - Honda VT600C Shadow VLX Service Manual

MAI NTENAN C E
N UTS, BOLTS, FASTEN ERS
Tighten the bolts, nuts and fasteners at the i ntervals shown in
the Maintenance Schedule (page
Check that a l l chassis nuts and bolts are tightened t o their cor­
rect torque values ( page 1 -5 , 6 and 7 ) .
Check a l l cotter pins and safety clips.
WHEELS/TI RES
TI R E P R E S S U R E
NOTE
Tire pressure should be checked when the tires are COLD .
•
Tire size
C o l d tire Up to
pressures vehicle
kPa capacity
( kg/cm2, load
psi)
U p to 90 kg
(200 lbs)
load
Maximum weight capacity
Tire Bridgestone
brand Dunlop
Check t h e tires for cuts, imbedded nails, or other sharp ob­
jects .
Check the front and rear wheels for trueness ( Section 1 2 and
1 3 ) .
Measure the tread depth at the center of the tires .
Replace the tires if the tread depth reaches the following limit:
MINIMUM TREAD DEPTH :
Front: 1 . 5 mm (0.06 in)
Rear: 2.0 mm (0.08 in)
Tighten the wheel spokes periodically.
TORQUE (front/rear) : 4 N•m ( 0 . 4 kg-m , 2 . 9 ft-lb)
TOOL:
Spoke wrench
3 -2 0
3-3 ) .
Front Rear
1 00/90- 1 9 5 7 S 1 70/80- 1 5 7 7 S
200 ( 2 . 00, 29) 2 50 ( 2 . 50, 36)
200 ( 2 .00, 29) 200 ( 2 .00, 29)
kg ( 3 5 5 lbs)
1 61
L 09 G 546
3
F24 K 5 5 5
07JMA - MR601 00
N ot ava i l a b l e in U . S . A .
( 1 ) SPO K E