To balance the wheel, i nstall wheel weights on the highest
side of the rim, the side opposite to the chalk marks. Add just
enough weight so the wheel will no longer stop i n the same po
sition when it is spun .
D o not a d d more than 70 grams.
e
WHEEL BEARING
Turn the inner race of each bearing with your finger.
The bearings should turn smoothly and quietly.
Also check that the bearing outer race fits tightly i n the hub.
Remove and discard the bearings if the races do not turn
smoothly, quietly, o r if they loosely in the hub.
B EA R I N G R E P LA C E M E N T
Remove the front wheel ( page 1 2-7) .
Remove the dust seal and retainer from the left side of the
wheel hub.
Remove the dust seal from the right side of the hub.
Remove the brake disc mounting bolts and disc.
F R O N T W H EEL/S USPENSION/STEERING
( 1 ) WHEEL WEIGHT
( 1 ) WHEEL BEARING
( 1 ) DUST SEALS
1 2-9