Honda VT600C Shadow VLX Service Manual page 174

C RAN KSHAFT/TRANSMISSION
Apply oil to all crankcase bolts .
2
Instal l and tighten the right crankcase bolts i n a crisscross pat­
tern in or 3 steps.
NOTE
Tighten the 8 mm bolts first, then tighten the 6 mm bolts.
•
2
I nstall and tighten the left crankcase bolts in a crisscross pat­
tern in or 3 steps.
NOTE
Tighten the 8 mm bolts first, then tighten the 6 mm bolts .
•
I nstall the rear cam chain drive sprocket over the crankshaft,
aligning the extra-wide splines i n the sprocket and crankshaft.
Instal l the rear cam chain over the drive sprocket.
Install the oil pipe stay and cam chain tensioner set plate .
Tighten the bolt sercurely.
1 1 - 20