Crankcase Assembly - Honda VT600C Shadow VLX Service Manual

'88 . '89 . ' 9 1 -' 9 5 :
I nstall the right shift fork with the " R " mark o n the fork facing
up.
Assemble the mainshaft, countershaft, shift fork shaft and
shift drum.
I nstall them into the l eft crankcase as an assembly.
After'9 5 :
Assemble the mainshaft a n d countershaft .
I nstall them into the left cankcase as an assembly .
I nstall the shift forks into the shifter gear g rooves with the
markings facing up ( right crankcase side) .
I nstall the shift drum by aligning the shift fork guide pins wiht
the shift drum guide g rooves .
I nsert the shift fork shaft throug h the shift forks into the left
crankcase with the stepped end facing u p .
CRAN KCASE ASSE M BLY
Apply sealant to the crankcase mating surfaces.
I nstall the dowel pins.
Assemble the right and left crankcases being careful to align
the dowel pins and shafts .
•
CAUTION
Do not force the crankcase halves together; if there is exessive
force required, something is wrong. Remove the right crank­
case and check for misaligned parts.
CRANKSHAFT/TRANSMISSION
( 1 DOW EL PINS
I
,
STE P P E D
EN D
1 1 - 1 9