Honda VT600C Shadow VLX Service Manual page 113

Install the dowel pins and new gasket.
'88, '89 :
Tighten t h e right c r a n kcase cover mounting bolts in a
crisscross pattern in or 3 steps and install the clutch cable
2
holder and oil pipe holder at the same time.
Connect the clutch cable to the clutch lifter arm.
Tighten the oil pipe bolt with the sealing washers .
TORQU E : 23 N · m ( 2 . 3 kg-m, 1 7 ft-lbl
Fill the crankcase with engine oil (page
Adjust the clutch lever free play (page 3- 1 8 )
After '89:
Tighten t h e right c r a n kcase cover m o u nti n g bolts i n a
crisscross pattern in or 3 steps and i nstall the clutch cable
2
holder and oil pipe holder at the same time.
Connect the clutch cable to the clutch lifter arm .
Fill the crankcase with engine oil (page
Adjust the c l utch lever free play (page 3- 1 8 )
2 -4 )
2 - 4 )
CLUTCH/G EARS H I FT LI N KA G E
7 - 1 5